 |
| home | news | FYI | products | tools | contact us | locate a dealer | HIPPO End Users |
|
|
|
|
HIPPO 2042E Status: Nov 2008 Multiple units sold to US Army  Close-Up of early, prototype control panel
General Description: The Mobile Hydraulic Equipment Company's 2042E power pack is a skid mounted, self contained, diesel-engine-driven power pack, which provides air, electric, and hydraulic power for continuous duty use, up to 6 hours on a single tank of fuel. The unit has a large heat exchanger for keeping hydraulic oils at optimum temperatures during operation. The unit is automatically load-sensitive to different tools as they come on and off line during operation. The 2042E Will Provide:
Industrial Diesel, 12 volt starter, glow plug system, controller, fuel shutdown solenoid, 12 volt 55 amp alternator, load sensitive governor, hydraulic pump mount and drive adapter, water radiator with pusher fan, dry type air filter, muffler with thermal wrap. Hydraulic Control Manifold The HCM10 shall be an integrated metered flow diverter with dual pressure relief's (one for each circuit), a central return circuit, and auto select for engaging the hydraulic driven, AC generator, and air compressor. Instrument Package: Instrumentation includes: Hour-meter, engine oil pressure light, coolant temp light, hydraulic oil temp light, 30 amp push in breaker, volt meter, hydraulic oil, air, and fuel level gauge. Safety shutdown systems for low engine oil level, high coolant and hydraulic oil temperature. Wiring system is color coded and labeled every 3 inches to indicate what component part each wire operates and whether positive or negative volts. Pump & Cooling Hydraulic Pump shall be a twin section, fixed displacement gear pump, with multipower modifications. Twin oil coolers (one each for hydraulic and compressor oils) with total cooling of 60,000 BTU's shall be provided. Power Outlets: One (1) fully adjustable hydraulic tool circuit providing 0-10 GPM at 2000 PSI Two 110 volt 25 amp GFI outlets and One 12 volt power outlet (one is for jump start/crane power) Air outlet for 40cfm at 110psi (using the selector), one crow's foot, and one quick disconnect Capabilities: Size and Weight: 62.5 in long X 34.75 in wide X 43.5 in high and approximately 1700lbs* (including fluids) *Note* This unit has a 7ga "skin", which is very strong, but also very heavy. It was designed for the US Army, and thus had to be a very stout, robust unit. Which it is! See Also: Some End-Users: |
|
Phone: 816-474-2034 Fax: 816-474-7447 Toll Free: 800-844-0624